Multi-Zone Condenser 48K
The TOSOT quad zone condenser 48K (model TM48D6MO) is a 4-ton multi-zone heat pump that runs two to five indoor units from one outdoor unit. It is the top capacity for a TOSOT quad zone or 5 zone system and the one contractors reach for on whole-home jobs where every zone carries a real load.
High-efficiency heating and cooling with built-in Wi-Fi, cold-climate performance, and manufacturer-backed warranty.
Key Features of the TOSOT Quad and 5 Zone 48K Heat Pump
Up to 21 SEER2 Efficiency
Cold-Climate Heating Down to -22°F
Wi-Fi Built-In
10-Year Warranty
Dual Through 5 Zone: How to Set Up the 48K
- 5 zone: whole home heating and cooling in larger homes without ductwork
- Quad zone: four large zones, such as a great room, kitchen, primary suite, and finished basement
- Tri zone: three high-load spaces in a home replacing a central system
- Dual zone: two large open areas or light commercial spaces
The 48K gives a quad zone or 5 zone layout the most capacity per room, so larger heads such as 18K or 24K wall mounts can serve main living areas alongside 9K or 12K units in bedrooms. For jobs beyond 4 tons, the line continues to the Multi-Zone Condenser 60K.
TOSOT Multi Zone Technical Specifications
Compatible Indoor Units for a TOSOT Multi Zone System:
- Wall Mount (7K, 9K 220v Standard, 12K 220v Standard, 18K, 24K)
- Mini Console
- Floor/Ceiling Console
- Slim Duct
- 8-Way Cassette
- One-Way Cassette
The 48K condenser accepts any mix of these indoor styles on one system. Pair a slim duct unit with wall mounts, or put a cassette in the kitchen and consoles in the bedrooms. NEEP and AHRI documents below cover ducted, non-ducted, and mixed combinations.
Why Contractors Source TOSOT Heat Pump Equipment From TOSOT Comfort
TOSOT Comfort is the contractor channel for TOSOT AC equipment. When you spec a TOSOT quad zone system through us, you get:
- Sold only to licensed HVAC contractors, not through Home Depot, Amazon, or Lowe's
- Stock in NY, MA, PA, MD, NC, ME, and NH warehouses with regional pickup and next-day local delivery
- A dedicated contractor account rep and an in-house technical support team
- A 10-year warranty on parts and compressor, compared with the 5-year coverage common on retail listings
Ready to quote a job? Contact our team to set up a contractor account or check local availability.
Technical Documents & Downloads
Download the TM18D6MO submittal, NEEP listings, and AHRI certificates for rebate paperwork, permit submittals, and equipment schedules.
Frequently Asked Questions
The 48K condenser (TM48D6MO) runs two to five indoor units, so it works as a dual zone, tri zone, TOSOT quad zone, or 5 zone system. Confirm the connectable capacity range in the TM48D6MO submittal.
Both run five zones. The 48K adds 6,000 BTU, so it fits five zones where several rooms carry larger loads, while the 42K suits five zones with more bedrooms and fewer large spaces.
Yes. 48,000 BTU equals 4 tons of total capacity, shared across the connected indoor units based on demand.
In many homes, yes. The 48K condenser pairs with slim duct units as well as wall mounts and cassettes, so it can condition a whole home in up to five zones. Run a Manual J load calculation to confirm sizing.
Contractors get a dedicated account rep, an in-house tech support team, and a 10-year warranty on parts and compressor.

%20(1).png)
%20(1)%20(1).png)
%20(1)%20(1)%20(1)%20(1)%20(1)%20(1)%20(1).png)